2016 DMG NZX 2000/800 SY2

Sold

2016 DMG NZX 2000/800 SY2

Location:Belgium

Description

DMG turning center in excellent condition!


First use: 06/2016

Spindel hours: 7851h

Very well equipped and well maintained


Can be inspected under power.

IMMEDIATELY AVAILABLE.



2 spindels

2 turrets with Y-axis

Chuck Footswitch double

Spindle 2 Tailstock functions + Spindle 2 coolant system through the spindle

Chip conveyor: right discharge, hinge type with drum filter type

High pressure coolant for 2T specifications

Air bladder for chuck spindle 1

Signal light 4 colors Workpiece unloader (spindle 1 workpiece receiver + spindle 2 single hand)

workpiece conveyor belt

External workpiece tray

Barfeeder IEMCA Master 80 HF


Measuring system for manual and dismountable tools for spindel 1 and 2

X-axis direct reading linear ruler (Turret 1)

X-axis direct read linear ruler (turret 2)

Z axis direct reading linear ruler (turret 2)


Set of toolholders included


       


Specifications

ManufacturerDMG
ModelNZX 2000/800 SY2
Year2016
ConditionUsed
Maximum machining diameter. mm320
Standard turning diameter mm200
Maximum diameter of the workpiece mm300
Maximum length of turning mm810
Bar machining capacity mm65[80]
Allowed diameter above the bench mm800
Useful diameter above the cross slide mm800
Maximum distance between large spindle noses mm1130
ControlFanuc F31iB with Celos-Ergoline Touch
Number of spindles2
Spindel 1Spindle Kitagawa 10", spindle hole Ø 91 mm (spindle speed 4,000 min-1, 26/22 kW)
Spindel 2Spindle Kitagawa 10" + Hainbuch, High torque spindle (spindle 2) 25/ 22 kW, 5,000 min-1
Number of turrets2, both equipped with Y-axis
Y-axis movement110 mm (+65 mm; -45 mm)
Number of tool holder positions16 per turret (BMT40)
BarfeederIEMCA Master 80 HF
X axis movement210 mm
Y axis movement110 <+65, -45> mm
Z1 axis movement 300 <+100> mm
Z2 axis movement810 mm